All new products released after March of 2025 will not need templates to show new parameters. These devices were not integrated with Z-Box and as such, have never had a template created. We have updated the Configuration Command Class in the device firmware itself for these devices, so they will automatically provide the parameter name, descriptions and values without the need for the templates. You can find a list of devices that will not need templates at the bottom of the article.

 

For earlier devices, they have been integrated and will utilize the template when included. This overrides the Configuration Command Class, unfortunately, so if you have updated the firmware on your Zooz device, but the new parameters are not available to you yet in the hub interface, you will need to use the JSON files below, which will be updated with each new firmware release to ensure access to all parameters and functionality. 

How to Add/Modify a Template on Z-Box

Follow the instructions in the article below regarding uploading and modifying a device parameter template.

How To Access Advanced Device Settings On Your Z-Box Hub

Completed JSON Files

ZEN04 Smart Plug

Firmware 1.30, 2.30

ZEN04 Change Log

ZEN04 JSON File

ZEN17 Universal Relay

Firmware 1.40, 2.10

ZEN17 Change Log

ZEN17 JSON File

ZEN30 Double Switch

Firmware 3.20, 4.30

ZEN30 Change Log 

ZEN30 JSON File

ZEN32 Scene Controller

Firmware 10.40, 2.40, 3.0

ZEN32 Change Log

ZEN32 JSON File

ZEN71 On | Off Switch

Firmware 10.30, 2.30, 3.50

ZEN71 Change Log

ZEN71 JSON File

ZEN72 Dimmer

Firmware 10.40, 2.20, 3.50

ZEN72 Change Log 

ZEN72 JSON File

ZEN73 Toggle On | Off Switch

Firmware 10.0, 2.30

ZEN73 Change Log 

ZEN73 JSON File

ZEN74 Toggle Dimmer

Firmware 10.10, 2.30

ZEN74 Change Log 

ZEN74 JSON File

Pending JSON FIles

We're currently working on the following products and will update them as soon as the files are completed.

ZEN05 Outdoor Smart Plug

Firmware 2.0:

ZEN05 Change Log

ZSE11 Q Sensor

Firmware 1.30 & 2.0:

ZSE11 Change Log

ZEN14 Outdoor Double Plug

Firmware 1.20 & 2.0

ZEN14 Change Log

ZEN15 Power Switch

Firmware 1.06, 2.10

ZEN15 Change Log

ZEN16 MultiRelay

Firmware 1.20, 2.10, 3.10

ZEN16 Change Log

ZSE18 Motion Sensor

Firmware 2.0

ZSE18 Change Log

ZEN20 Power Strip

Firmware 2.03, 3.0, 4.2

ZEN20 Change Log 

ZEN34 Remote Switch

Firmware 1.40, 2.0

ZEN34 Change Log 

ZAC36 Titan Valve Actuator

Firmware 1.24, 2.10

ZAC36 Change Log 

ZEN37 Wall Remote

Firmware 1.0, 2.10

ZEN37 Change Log 

ZAC38 Range Extender

Firmware 1.30

ZAC38 Change Log

ZSE41 Open | Close XS Sensor

Firmware 1.40, 2.0

ZSE41 Change Log 

ZSE42 Water Leak XS Sensor

Firmware 1.50, 2.20

ZSE42 Change Log 

ZSE43 Tilt | Shock XS Sensor

Firmware 1.20, 2.0

ZSE43 Change Log 

ZSE44 Temperature | Humidity XS Sensor

Firmware 1.30, 2.10

ZSE44 Change Log 

ZEN51 Dry Contact Relay

Firmware 1.80

ZEN51 Change Log 

ZEN52 Double Relay

Firmware 1.80

ZEN52 Change Log

ZEN53 DC Motor Controller

Firmware 1.40

ZEN53 Change Log

ZEN54 0-10V Dimmer

Firmware 1.40

ZEN54 Change Log 

ZEN55 Smoke & CO Detector Bridge

Firmware 1.30

ZEN55 Change Log 

ZSE70 Outdoor Motion Sensor

Firmware 1.20

ZSE70 Change Log

ZEN76 On | Off Switch

Firmware 10.30, 2.30, 3.50

ZEN76 Change Log 

ZEN77 Dimmer

Firmware 10.40, 2.30, 3.20, 4.60

ZEN77 Change Log 

Devices That Don't Require a Template

These are devices that have never had a template in Z-Box and/or were released with the updated Configuration Command Class in the device firmware itself. They will automatically provide the parameter name, descriptions and values without the need for the JSON templates.

ZEN35 Scene Dimmer

ZEN37 Wall Remote

ZSE70 Outdoor Motion Sensor

ZEN75 Heavy Duty Switch